EE 9304 Electrical Machines-II syllabus download

EE9304 ELECTRICAL MACHINES – II L T P C
3 1 0 4
AIM
To study the theory, operation and performance of AC machines.
OBJECTIVES
 To study the theory and performance characteristics of Induction machines.
 To study the theory and performance characteristics of Synchronous machines.
 To study theory of operation and performance characteristics of fractional
horse power motors.
UNIT I INDUCTION MACHINES: THEORY 12
Construction – types – principle of operation of motor – emf, torque and power flow
equations – torque and speed curves – double cage motor and equivalent circuit –
synchronous induction motor – induction generator.
UNIT II INDUCTION MACHINES: PERFORMANCE 12
Induction motor testing, equivalent circuit and circle diagram – losses and efficiency –
performance characteristics – harmonics, cogging and crawling – starting methods –
speed control methods – braking – temperature rise and insulation – energy efficient
motors.25
UNIT III SYNCHRONOUS MACHINES: THEORY 12
Construction – types – generator and motor action – theory of cylindrical rotor machines
– armature reaction and synchronous reactance – emf and power equation –
synchronization – synchronizing power and parallel operation – two reaction theory of
salient pole machines and determination of direct axis and quadrature axis reactance.
UNIT IV SYNCHRONOUS MACHINE: PERFORMANCE 12
Pre-determination of voltage regulation – synchronous machine on infinite bus bars – V
curves and inverted V-curves of motor and generator – steady state operating
characteristics – hunting – short-circuit transients – synchronous condenser action.
UNIT V FRACTIONAL HORSE POWER MOTORS 12
Single-phase induction motor – double revolving field theory – testing, equivalent circuit
and performance analysis – starting methods – universal motor.
L=45 T=15 TOTAL: 60 PERIODS
TEXT BOOKS:
1. Say M.G, "Performance and Design of Alternating Machines' CBS Publishers and
Distributors, New Delhi, First Indian Edition, Reprint 1998.
2. Nagarth I.J. and Kothari D.P., Electric Machines, Tata McGraw Hill, New Delhi,
Edition 2004.
REFERENCES:
1. Fitzgerald A.E., Charles Kingsley Jr., and Stephen D.Umans, "Electric Machinery,
"Tata McGraw Hill, New Delhi, Edition 2002.
2. Irving L.Kosow, "Electric Machinery and Transformers" Prentice Hall of India
Private Limited, New Delhi., Second Edition, Reprint 2007.
3. Stephan J.Chapman, "Electric Machinery Fundamentals', McGraw hill International
Edition, New Delhi, 2005.

7th semester syllabus for civil engineering

SEMESTER – VII
CODE NO. COURSE TITLE
L T P C
THEORY
CE 9401 Principles of Management 3 0 0 3
CE 9402 Structural Dynamics and Earth Quake Engineering 3 0 0 3
CE 9403 Ground Improvement Techniques 3 0 0 3
CE 9404 Estimating, Costing and Valuation Engineering 3 0 0 3
CE 9405 Railways and Airports Engineering 3 0 0 3
CE 9406 Architecture and Town Planning 3 0 0 3
Elective-III 3 0 0 3
PRACTICAL
CE 9407 Practical Training (4 Weeks) - - - 2
TOTAL 21 0 0 23
CE 9401 PRINCIPLES OF MANAGEMENT L T P C
3 0 0 3
OBJECTIVE:
To introduce the basic concepts of management needed for a Civil Engineer
UNIT I BASIC CONCEPTS IN MANAGEMENT 9
Types of business operations -Sole proprietorship – Partnership – Company – Public and
private sector enterprises / Joint ventures, collaborations.
Functions of Management -Principles of management – Functions of management –
Functions of a manager.
Production Management -Planning – scheduling – procurement – Inventory control –
management tools – L.P. – PERT, CPM, etc.
UNIT II INTRODUCTION TO MARKETING AND FINANCIAL MANAGEMENT 9
Market – Marketing, Segmentation, Positioning, Marketing Research, Market Planning, Scope
of financial management – Cost accounting Vs Financial accounting, Appraisal of projects,
Investment decisions – concept of pay back.
UNIT III MATERIALS AND EQUIPMENT MANAGEMENT 9
Planning – Identification, Procurement, Schedule and Cost control – systems approach in
resource management – ABC analysis, VED analysis, FSN analysis, vendor rating evaluation,
buying versus leasing of equipment
UNIT IV HUMAN RESOURCE MANAGEMENT 9
Scope and objectives of HRM – Man power policy and planning – Recruitment and selection –
Training performance appraisal – Wage policy and compensation systems – Company union
relationship and collective bargaining – Accidents – Absenteeism and turn over – Grievances /
conflicts – Identification and resolution.
UNIT V INTRODUCTION TO COMPUTER APPLICATION (IN CONSTRUCTION
MANAGEMENT) 9
Project identification-formulation-Preparation of detailed project report (DPR)-Planning –
Scheduling and Resource analysis - Recording and operations- Project accounting, costing
and finance – usage of project management softwareTOTAL: 45 PERIODS
TEXT BOOKS:
1. Konni, Donnel C.O., and Weighnrich, H., “Management” Eighth Edition, McGraw Hill
International Book Company, New York, 1997.
2. Philip Kotler, “Marketing Management”, Prentice-Hall of India, New Delhi, 1998.39
REFERENCES:
1. Momoria, “Personnel Management”, Himalaya Publishing Co., New Delhi, 1992.
2. Sharma, J.L., “Construction Management and Accounts”, Sathya Prakashan, New Delhi,
1994.
3. Srinath, L.S., “An Introduction to Project Management”, Tata McGraw Hill Publications,
New Delhi, 1995.
CE 9402 STRUCTURAL DYNAMICS AND EARTHQUAKE ENGINEERING L T P C
3 0 0 3
OBJECTIVE:
To provide a basic understanding of dynamic loading. Study the effect of earthquake loading
on the behaviour of structures. Understand the codal provisions to design the structures as
earthquake resistant.
UNIT I SINGLE DEGREE OF FREEDOM SYSTEMS 9
Formulation of equation of motion, Free and forced vibrations, Damping, Types of DampingDamped and undamped vibrations, Response to dynamic loading.
UNIT II MODAL ANALYSIS 9
Free and forced vibration of undamped and damped MDOF systems. Equation of motions,
Evaluation of natural frequencies and modes, Eigen Values and Eigen Vectors
UNIT III INTRODUCTION TO EARTHQUAKE ENGINEERING 9
Elements of Engineering Seismology, Characteristics of Earthquake Engineering, Earthquake
History, Indian Seismicity.
UNIT IV BEHAVIOUR OF STRUCTURES AND SOIL 9
Performance of structures under past earthquakes, Lessons learnt from past earthquakes–
soil liquefaction - Soil – Structure- Interaction (SSI) effects.
UNIT V EARTHQUAKE RESISTANT DESIGN 9
Concept of Earthquake Resistant Design, Provisions of Seismic Code IS 1893 (Part I),
Response Spectrum, Design Spectrum, Design of Buildings, Reinforcement Detailing,
Provisions of IS 13920.
TOTAL: 45 PERIODS
TEXT BOOKS:
1. Agarwal and Shrikhande,”Earthquake Resistant Design of Structures”, Prentice Hall of
India, 2007
2. Clough R.W, and Penzien J , Dynamics of Structures, Second Edition, Mc Graw – Hill
International Edition, 1993
REFERENCES:
1. Mario Paz, Structural Dynamics – Theory and Computations, Third Edition, CBS
publishers, 1990.40
2. Jaikrishna, A.R. Chandrasekaran and Brijesh Chandra, “Elements of Earthquake
Engineering”, South Asia Publishers, New Delhi.
3. Minoru Wakabayashi, “Design of Earthquake Resistant Buildings”, Mc Graw – Hill Book
Company, New York, 1986
4. Humar J L “Dynamics of Structures”, Prentice Hall, 1990.
5. Anil K Chopra, “Dynamics of structures – Theory and applications to Earthquake
Engineering”, Prentice Hall Inc., 2001.
6. C V R Moorthy, “Earthquake Tips”, NICEE, IIT Kanpur, 2004
CE 9403 GROUND IMPROVEMENT TECHNIQUES L T P C
3 0 0 3
OBJECTIVE:
At the end of the course student is expected to identify the problematic soil and suitable
suggest remedial measures to improve their behaviour.
UNIT I PROBLEMATIC SOIL AND IMPROVEMENT TECHNIQUES 8
Role of ground improvement in foundation engineering – methods of ground improvement –
Geotechnical problems in alluvial, lateritic and black cotton soils – Selection of suitable ground
improvement techniques based on soil conditions.
.
UNIT II DEWATEREING 10
Dewatering Techniques - Well points – Vacuum and electroosmotic methods – Seepage
analysis for two – dimensional flow for fully and partially penetrated slots in homogeneous
deposits (Simple cases only).
UNIT III INSITU TREATMENT OF COHESIONLESS AND COHESIVE SOILS 10
In-situ densification of cohesion-less soils and consolidation of cohesive soils: Dynamic
compaction Vibroflotation, Sand compaction piles and deep compaction. Consolidation:
Preloading with sand drains, and fabric drains, Stone columns and Lime piles-installation
techniques only – relative merits of above methods and their limitations - stabilization of
expansive soils.
UNIT IV EARTH REINFORCEMENT 9
Concept of reinforcement – Types of reinforcement material – Reinforced earth wall –
Mechanism – simple design - applications of reinforced earth. Role of Geotextiles in filtration,
drainage, separation and road works.
UNIT V GROUT TECHNIQUES 8
Types of grouts – Grouting equipments and machinery – injection methods – Grout monitoring
– stabilization with cement, lime and chemicals.
TOTAL:45 PERIODS
TEXT BOOKS:
1. Purushothama Raj, P., Ground Improvement Techniques, Laxmi Publications (P) Ltd.,
New Delhi, 1999.
2. Koerner, R.M., Construction and Geotechnical Methods in Foundation Engineering,
McGraw Hill, 1994.
REFERENCES:
1. Moseley, M.P., Ground Improvement, Blockie Academic and Professional, Chapman and
Hall, Glassgow, 1998.
2. Jones J.E.P. Earth Reinfocement and Soil Structure, Butterworths, London, 1985.
3. Winterkorn, H.F. and Fang, H.Y. “Foundation Engineering Hand Book”, Van Nostrand
Reinhold, 1994.
4. Das, B.M. – “Principles of Foundation Engineering” (Fifth edition), Thomson Asia Pvt.Ltd.,
Singapore, 2003.
5. Coduto, D.P. “Geotechnical Engineering Principles and Practices”, Prentice Hall of India
Pvt.Ltd., New Delhi, 2002.
6. Koerner, R.M., Designing with Geosynthettics (Fourth Edition), Prentice Hall, New Jersey,
1999.


CE 9404 ESTIMATING, COSTING AND VALUATION ENGINEERING L T P C
3 0 0 3
OBJECTIVE:
To offer knowledge in estimation, tender practices, contract procedures, and valuation. The
student will be able to prepare estimates, call for tenders and execute works.
UNIT I QUANTITY ESTIMATION 9
Philosophy – Purpose – Methods of estimation – Types of estimates – Approximate estimates
–Detailed estimate – Estimation of quantities for buildings, roads, canals and hydraulic
structures using computer softwares.
UNIT II RATE ANALYSIS AND COSTING 9
Standard Data – Observed Data – Schedule of rates – Market rates – Assessment of Man
Hours and Machineries for common civil works – Rate Analysis – Cost Estimates using
Computer softwares
UNIT III SPECIFICATIONS AND TENDERS 9
Specifications – Detailed and general specifications – Constructions – Sources – Types of
specifications – TTT Act 2000 – Tender notices – types – tender procedures – Drafting model
tenders , E-tendering-Digital signature certificates- Encrypting -Decrypting – Reverse
auctions.
UNIT IV CONTRACTS 9
Contract – Types of contracts – Formation of contract – Contract conditions – Contract for
labour, material, design, construction – Drafting of contract documents based on IBRD /
MORTH Standard bidding documents – Construction contracts – Contract problems –
Arbitration and legal requirements.
UNIT V VALUATION 9
Definitions – Various types of valuations – Valuation methods – Valuation of land – Buildings –
Valuation of plant and machineries.
TOTAL: 45 PERIODS
TEXT BOOKS:
1. B.S.Patil, ‘Civil Engineering Contracts and Estimates’, University Press, 2006.
2. D.N. Banerjee, ‘Principles and Practices of Valuation’, V Edition, Estern Law House, 1998.42
REFERENCES:
1. Hand Book of Consolidated Data – 8/2000, Vol.1, TNPWD.
2. Tamil Nadu Transparencies in Tenders Act, 1998.
3. Arbitration and Conciliation Act, 1996.
4. Standard Bid Evaluation Form, Procurement of Good or Works, The World Bank, April
1996.
5. Standard Data Book for Analysis and Rates, IRC, New Delhi, 2003.
CE 9405 RAILWAYS AND AIRPORTS ENGINEERING L T P C
3 0 0 3
OBJECTIVE:
To introduce the students about the various types of transport like Railways and airways,
planning and design principles of construction of railway track and airport terminals will be
covered with an exposure on standards
UNIT I RAILWAY PLANNING AND CONSTRUCTION 9
Route alignment surveys, modern methods – Elements of permanent way – Rails, sleepers,
ballast, rail fixtures and fastenings, coning of wheels, creep in rails, defects in rails –
Geometric design of railway track, gradient, super elevation, widening of guage on curves
UNIT II RAILWAY STATION YARDS AND OPERATIONS 9
Planning and development of railway station yards, –Turnouts, points and crossings –
Signalling - Interlocking, track circuiting – Modern developments in railways, urban railways,
underground and tube railways–Basic planning for MRTS and Suburban railways–Electric
traction
UNIT III RAILWAY CONSTRUCTION AND MAINTENANCE 9
Earthwork – Stabilization of track on poor soil- Tunneling - Methods, drainage and ventilation
– Construction and maintenance of tracks – uniguage – Maintenance of rolling stocks and
signals
UNIT IV AIRPORT PLANNING 9
Airport site selection – Components of airports- Forecasting in aviation- Airport obstructions –
Zoning laws - Regional planning - Airport architecture - Airport lighting - Air traffic control aids
UNIT V AIRPORT DESIGN 9
Runway orientation – Basic runway length – Corrections to basic runway length – geometric
design of runways – Layout of taxiway and terminal area- airport pavement design (flexible
pavement only).
TOTAL: 45 PERIODS
TEXT BOOKS:
1. Saxena Subhash, C. and Satyapal Arora, A Course in Railway Engineering, Dhanpat Rai
and Sons, Delhi, 1998.
2. Khanna.S.K. Arora.M.G and Jain.S.S, Airport Planning and Design, Nemachand and
Brothers, Roorkee, 1994.
REFERENCES:
1. Vazirani.V.N. and Chandola.S.P., Transportation Engineering-Vol.1, Khanna Technical
Publications, New Delhi, 1991.
2. Shahini.P., Airport Technique, New Delhi
3. Priyani.V.B., Highway and Airport Engineering, Charotar Book Stall, 1994.
4. Rangwala.P.S, Railway Engineering, Charotar Publishing House, 1995.
5. Rangwala.P.S, Airport Engineering, Charotar Publishing House, 1996.
6. Agarwal.M.M., Indian Railway Track, New Delhi
CE 9406 ARCHITECTURE AND TOWN PLANNING L T P C
3 0 0 3
OBJECTIVE:
To provide the basic knowledge on the principles of design of buildings relating to the
environment and climate.
UNIT I ARCHITECTURAL DESIGN 8
Architectural Design – an analysis – integration of function and aesthetics – Introduction to
basic elements and principles of design.
UNIT II SITE PLANNING 9
Surveys – Site analysis – Development Control – Layout regulations- Layout design concepts.
UNIT III BUILDING TYPES 12
Residential, institutional, commercial and Industrial – Application of anthropometry and space
standards-Inter relationships of functions – Safety standards – Building rules and regulations –
Integration of building services – Interior design.
UNIT IV CLIMATE AND ENVIRONMENTAL RESPONSIVE DESIGN 8
Man and environment interaction- Factors that determine climate – Characteristics of climate
types – Design for various climate types – Passive and active energy controls – Green
building concept

UNIT V TOWN PLANNING 8
Planning – Definition, concepts and processes- Urban planning standards and zoning
regulations- Urban renewal – Conservation – Principles of Landscape design
TOTAL: 45 PERIODS
REFERENCES:
1. Francis D.K. Ching, “Architecture: Form, Space and Order”, VNR, N.Y., 1999.
2. Givoni B., “Man Climate and Architecture”, Applied Science, Barking ESSEX, 1982.
3. Edward D.Mills, “Planning and Architects Handbook”, Butterworth, London, 1995.
4. Gallian B.Arthur and Simon Eisner, “The Urban Pattern – City Planning and Design”,
Affiliated Press Pvt. Ltd., New Delhi, 1995.
5. Margaret Robert, “An Introduction to Town Planning Techniques”, Hutchinson,
London, 1990.
CE 9407 PRACTICAL TRAINING L T P C
0 0 0 2
OBJECTIVE:
To train the students in field work so as to have a first hand knowledge of practical problems
in carrying out engineering tasks. To develop skills in facing and solving the field problems.
SYLLABUS:
The students individually undertake training in reputed civil engineering companies for the
specified duration. At the end of the training, a report on the work done will be prepared and
presented. The students will be evaluated through a viva-voce examination by a team of
internal staff.

CE 9306 Hydrology and Water Resources Engineering syllabus download

CE 9306 HYDROLOGY AND WATER RESOURCES ENGINEERING L T P C
3 0 0 3
OBJECTIVE:
To make students understand the various hydrological processes, estimate the surface and
groundwater resources of a drainage basin and to estimate the hydrologic extremes i.e. floods
and droughts and their management.
UNIT I HYDROLOGIC PROCESSES 9
Introduction – Hydrometeorology - Hydrologic cycle - Precipitation and its types -
measurements - evaporation, evapotranspiration, infiltration and other abstractions.
UNIT II SURFACE RUNOFF 9
Drainage basins – hydrologic losses and rainfall excess – hydrograph analysis – unit
hydrograph – S-curve Synthetic unit hydrograph – Rainfall-runoff models - SCS method –
stream flow measurements.
UNIT III GROUNDWATER 9
Groundwater concepts – properties and types of aquifer – saturated flow – steady state one
dimensional flow – steady state well hydraulics – unsteady groundwater flow – Theis method
and Jacobs method – Ground Water Estimation by GEC norms - geophysical exploration -
sea water intrusion.
UNIT IV RESERVOIR PLANNING AND MANAGEMENT 9
Single and multipurpose projects – dams – types – fixation of storage capacity – Strategies for
reservoir operation – reservoir sedimentation.
UNIT V FLOODS AND DROUGHTS 9
Definition of floods and droughts – frequency analysis – flood control measures – Inter basin
water transfer – drought indices - drought prone area programme – artificial recharge – rain
water harvesting.
TOTAL: 45 PERIODS
TEXT BOOKS:
1. Subramanya .K. Engineering Hydrology, Tata McGraw Hill, 2003.
2. Raghunath .H.M., Hydrology, Wiley Eastern Ltd., 2004.
REFERENCES:
1. Linsley, R.K. and Franzini, J.B., Water Resources Engineering, McGraw Hill International
Book Company, 2000
2. Ven Te Chow, Maidment, D.R. and Mays, L.W., Applied Hydrology, McGraw Hill
International Book Company, 1998.
3. Todd.D.K., Ground Water Hydrology John Wiley and Sons, New York, 2000.

CE 9303 Foundation Engineering syllabus download

CE 9303 FOUNDATION ENGINEERING L T P C
3 0 0 3
OBJECTIVE:
To impart knowledge on common method of sub soil investigation and design of foundations.
At the end of this course student acquires the capacity to investigate the soil condition and to
select and design a suitable foundation.
UNIT I SITE INVESTIGATION AND SELECTION OF FOUNDATION 9
Scope and objectives – Methods of exploration – auguring and boring – Wash boring and
rotary drilling – Depth of boring – Spacing of bore hole – Sampling techniques –
Representative and undisturbed sampling methods - Split spoon sampler, Thin wall sampler,
Stationery piston sampler – Bore log report – Samples Penetration Tests (SPT and SCPT) –
Data interpretation - strength parameters and liquefaction potential - Selection of foundation
based on soil conditions.
UNIT II SHALLOW FOUNDATION 9
Introduction – Location and depth of foundation – Codal provisions – bearing capacity of
shallow foundation on homogeneous deposits – Terzaghi’s formula and BIS formula – factors
affecting bearing capacity – problems – Bearing capacity from in-situ tests (SPT, SCPT and
plate load) – Allowable bearing pressure – Seismic considerations in bearing capacity
evaluation. Determination of Settlement of foundations on granular and clay deposits – Total
and differential settlement – Allowable settlements – Codal provision – Methods of minimizing
total and differential settlements.
UNIT III FOOTINGS AND RAFTS 9
Types of foundation – Contact pressure distribution below footings and raft: Isolated footing –
Combined footings – Types and proportioning – Mat foundation – Types – Applications –
Proportioning – Floating foundation – Seismic force consideration – Codal Provision.
UNIT IV PILE FOUNDATION 9
Types of piles and their function – Factors influencing the selection of pile – Carrying capacity
of single pile in granular and cohesive soil – static formula – dynamic formulae (Engineering
news and Hileys) – Capacity from insitu tests (SPT and SCPT) – Negative skin friction – uplift
capacity- Group capacity by different methods (Feld’s rule, Converse – Labarre formula and
block failure criterion) – Settlement of pile groups – Interpretation of pile load test (routine test
only) – Underreamed piles – Capacity under compression and uplift.
UNIT V RETAINING WALLS 9
Plastic equilibrium in soils – active and passive states – Rankine’s theory – cohesionless and
cohesive soil – Coulomb’s wedge theory – Condition for critical failure plane – Earth pressure
on retaining walls of simple configurations – Culmann Graphical method – pressure on the
wall due to line load – Stability analysis of retaining walls.
TOTAL: 45 PERIODS
TEXT BOOKS:
1. Murthy, V.N.S, “Textbook of Soil Mechanics and Foundation Engineering”, CBS Publishers
and Distributors, New Delhi, 2007.
2. Gopal Ranjan and Rao, A.S.R., “Basic and Applied Soil Mechanics”, Wiley Eastern Ltd.
New Delhi (India), 2000.
3. Arora, K.R., “Soil Mechanics and Foundation Engineering”, Standard Publishers and
Distributors, New Delhi, 2002.
4. Varghese, P.C., Foundation Engineering, Prentice Hall of India (P) Ltd, New Delhi, 2005.
REFERENCES:
1. Das, B.M. “Principles of Foundation Engineering” (Fifth edition), Thomson Books, 2003.
2. Swamisaran, “Analysis and Design of Structures – Limit state Design”, Oxford IBH
Publishing Co.Pvt.Ltd., New Delhi, 2005.
3. Kaniraj, S.R., “Design aids in Soil Mechanics and Foundation Engineering”, Tata McGraw
Hill publishing company Ltd., New Delhi, 2002.
4. Bowles, J.E., “Foundation analysis and design”, McGraw Hill, 1994.
5. Punmia, B.C., Soil Mechanics and Foundations”, Laxmi Publications Pvt.Ltd. New Delhi,
1995.
6. Venkatramaiah, C., “Geotechnical Engineering”, New Age International Publishers, New
Delhi, 2007 (Reprint).

CE 9302 Design of steel Structures syllabus download

CE 9302 DESIGN OF STEEL STRUCTURES L T P C
3 0 0 3
OBJECTIVE:
To learn the design of Component and structure using steel and timber material subjected to
external loading.
UNIT I SECTIONS AND JOINTS 12
Types of steel structures – Properties of rolled steel sections and Light gauge steel sections –
Allowable Stresses as per IS code - Riveted and bolted connections – Failures of joints –
Single and multiple riveted lap and butt joints under axial and eccentric loading – Strength of
fillet and butt welded joints – Design of riveted and welded joints.
UNIT II TENSION MEMBERS 8
Design of simple and built-up members subjected to tension –Effective area of angles
connected to gussets.
UNIT III COMPRESSION MEMBERS 8
Maximum slenderness ratio of various compression members – IS code provision for
compression members – Design of simple and built-up compression members with lacings
and battens – Design of column bases.
UNIT IV BEAMS 11
Design of simple beams based on strength and stiffness as per IS code – Design of built – up
beams and curtailment of flange plates –Flange splice and web splice- Design of plate girder
and stiffeners.
UNIT V TIMBER 6Study of properties and strength of natural and laminated timber – Allowable stresses in
compression, tension and flexure as per IS Code – Types of joints with nails and bolts –
Design of simple compression members as per IS code– Design of beams for strength and
stiffness as per IS code.
TOTAL : 45 PERIODS
TEXT BOOKS:
1. Ram Chandra , Design of Steel Structures, Vol. I, Standard Book house, New Delhi,
1992.
2. Vazirani V.N. and Ratwani M.M., Steel Structures and Timber Structures, Khanna
Publishers, New Delhi, 1995.
3. Punmia.B.C., Ashok Kumar Jain, Anand Kumar Jain, “Comprehensive Design of Steel
Structures” Lakxmi Publications Pvt. Ltd., 1998.
REFERENCES:
1. Kazimi S.M.A and Jindal R.S., Design of Steel Structures, Prentice-Hall of India (P) Ltd.,
New Delhi, 1990.
2. Ramamrutham S., Design of Steel, Timber and Masonry Structures, Dhanpat Rai and
Sons, New Delhi, 1989.
3. Narayanan.R et al., Teaching Resource on Structural Steel Design, INSDAG, Ministry of
Steel Publications, 2002.
4. Duggal.S.K “ Design of Steel Structures” Tata McGraw Hill Publishing Company, 2005

4th semester syllabus download for Electronics and communication engineering

MA 9263 PROBABILITY AND RANDOM PROCESSES L T P C
3 1 0 4

AIM
To provide the necessary basic concepts in probability and random processes for
applications such as random signals, linear systems etc. in communications
engineering.

OBJECTIVES

• The students will have an exposure of various distribution functions and help in acquiring skills in handling situations involving more than one variable.
•  Able to analyze the response of random inputs to linear time invariant systems.

UNIT I RANDOM VARIABLES 9 + 3
Discrete and Continuous random variables – Moments – Moment generating
functions – Binomial, Poisson, Geometric, Uniform, Exponential, Gamma, Weibull
and Normal distributions – Functions of a random variable.

UNIT II TWO-DIMENSIONAL RANDOM VARIABLES 9 + 3
Joint distributions – Marginal and Conditional distributions – Covariance – Correlation
and Linear regression – Transformation of random variables - Central limit theorem
(for independent and identically distributed random variables).

UNIT III RANDOM PROCESSES 9 + 3
Classification – Stationary process – Markov process - Poisson process – Random
telegraph process.

UNIT IV CORRELATION AND SPECTRAL DENSITIES 9 + 3
Auto-correlation functions – Cross-correlation functions – Properties – Power
spectral density – Cross-spectral density – Properties.

UNIT V LINEAR SYSTEMS WITH RANDOM INPUTS 9 + 3
Linear time invariant system – System transfer function – Linear systems with
random inputs – Auto-correlation and Cross-correlation functions of input and output
– White noise.
L: 45, T: 15, TOTAL : 60 PERIODS

TEXT BOOKS
1. Ibe, O.C.,“Fundamentals of Applied Probability and Random Processes”,
Elsevier, 1st Indian Reprint, (2007).
2. Peebles, P.Z., “Probability, Random Variables and Random Signal Principles”,
Tata McGraw Hill, 4 th edition, New Delhi, (2002).

REFERENCES
1. Yates, R.D. and Goodman, D.J., “Probability and Stochastic Processes”,
John Wiley and Sons, 2nd edition, (2005).
2. Stark, H. and Woods, J.W., “Probability and Random Processes with
Applications to Signal Processing”, Pearson Education, Asia, 3 rd edition, (2002).
3. Miller, S.L. and Childers, D.G.,“Probability and Random Processes with
Applications to Signal Processing and Communications”, Academic Press,  (2004).
4. Hwei Hsu, “Schaum’s Outline of Theory and Problems of Probability, Random
Variables and Random Processes”, Tata McGraw Hill edition, New Delhi, (2004).


EC 9251 DIGITAL ELECTRONICS AND SYSTEM DESIGN L T P C
3 1 0 4

UNIT I BASIC CONCEPTS AND COMBINATIONAL CIRCUITS 9
Number Systems – n’s complement –Codes - Sum of products and product of sums,
Minterms and Maxterms, Karnaugh map and Tabulation method – problem
formulation and design of combinational circuits, Adder, Subtractor,
Encoder/decoder, – three state devices, Priority Encoder, Mux/Demux, Codeconverters, Comparators, Implementation of combinational logic using standard ICs,
ROM, EPROM and EEPROM – Coding of Combination Circuits in verilog.

UNIT II SEQUENTIAL CIRCUITS 9
Flip flops – SR, JK, T, D, Master/Slave FF, Triggering of FF, Analysis of clocked
sequential circuits – their design, state minimization, moore/mealy model, state
assignment, circuit implementation, Registers- shift registers, Ripple counters,
Synchronous counters, Timing signal, RAM, Memory decoding, Semiconductor
memories - Feedback sequential- Circuit analysis and design- sequential circuit
design with verilog.

UNIT III FUNDAMENTAL MODE SEQUENTIAL CIRCUITS 9
Stable, Unstable states, output specifications, cycles and races, state reduction, race
free assignments, Hazards, Essential Hazards, Pulse mode sequential circuits,
Design of Hazard free circuit

UNIT IV MEMORY, CPLDs AND FPGAs 9
ROM, Read/Write memory – Static RAM, Dynamic RAM, PAL, PLA, CPLD – FPGA
XL 4000 –
CLBs – I/O Block – Programmable Inter connects– Realization of simple
combinational and
sequential circuits

UNIT V LOGIC GATES 9
Logic families- TTL, NMOS, CMOS, BiCMOS logic-Electrical behavior-static,
dynamic-CMOS input and output structures-CMOS logic families -low voltage CMOS
logic & interfacing-Bipolar logic Realization of NAND and NOR logic.

L : 45, P: 15 TOTAL : 60 PERIODS
TEXT BOOKS
1. Morris Mano, “ Digital logic ”, Prentice Hall of India, 1998
2. John. F. Wakerly, “Digital design principles and practices”, Pearson Education,
Fourth Edition, 2007 .
3. Charles H. Roth, Jr, “Fundamentals of Logic Design”, Fourth edition, Jaico
Books, 2002

REFERENCES
1 William I. Fletcher, “An Engineering Approach to Digital Design”, Prentice- Hall
of India, 1980
2 Floyd T.L., “Digital Fundamentals”, Charles E. Merril publishing company, 1982
3 Jain R.P., “Modern Digital Electronics”, Tata McGraw Hill, 1999.

EC 9252 ELECTRONIC CIRCUITS II L T P C
3 1 0 4

UNIT I FEEDBACK AMPLIFIERS AND STABILITY 9
Basic feedback concepts – Properties of Negative feedback – Four feedback
topologies with amplifier circuit. Examples – Analysis of series – shunt feedback
amplifiers – stability problem – Frequency compensation.

UNIT II OSCILLATORS 9
Barkhausen criteria for oscillator – Analysis of RC oscillators – Phase shift Wein
bridge oscillators – LC oscillators – Colpitt, Hartley, Clapp, Crystal , Armstrong,
Franklin and Ring Oscillators

UNIT III TUNED AMPLIFIERS 9
Basic principles – Inductor losses – Use of transformers – Single tuned amplifier
frequency analysis - Amplifier with multiple tuned circuits – Cascade – Synchronous
tuning – Stagger tuning – Stability of tuned amplifiers using Neutralization
techniques.

UNIT IV MULTIVIBRATORS AND TIME BASE GENERATORS 9
Switching characteristics of transistors – Bistable, Monostable and Astable operation
– Collector coupled and Emitter coupled circuits – Schmitt trigger - Voltage sweep
generators – Current sweep generators

UNIT V RECTIFIERS AND POWER SUPPLIES 9
Halfwave and fullwave rectifiers with filters – Ripple factor – Series Voltage Regulator
analysis and design – IGBT – working and characteristics – AC voltage control using
thyristors – SMPS – DC/DC convertors – Buck, Boost, Buck-Boost analysis and
design.
L:45,T:15 TOTAL: 60 PERIODS
TEXT BOOKS
1 David .A. Bell, Solid state pulse circuits, Prentice Hall of India,1992.
2. F. Bogart Jr. Electronic Devices and Circuits 6th Edition, Pearson Education, 2007.

REFERENCES
1. Paul Gray, Hurst, Lewis, Meyer,” Analysis and Design of Analog Integrated
Circuits”, 4th Edition ,. John Willey & Sons 2005
2 . Behzad Razavi, “Design of Analog CMOS Integrated Circuits”, Tata McGraw
Hill, 2007.
3 Donald .A. Neamen, Electronic Circuit Analysis and Design –2nd edition,Tata  McGraw Hill, 2007.
4. Adel .S. Sedra, Kenneth C. Smith, Micro Electronic circuits, 5th Edition,Oxford
University Press, 2004.
5. Muhammed H.Rashid power electronics Pearson Education / PHI , 2004
6. Jacob Millman, Taub Pulse, Digital and Switching Waveforms 2nd Edition 2007


EC 9253 COMMUNICATION SYSTEMS L T P C
3 0 0 3

UNIT I ANALOG MODULATION 9
Amplitude Modulation – AM, DSBSC, SSBSC, VSB – Angle modulation – PM and
FM –Modulators and Demodulators – Fourier Transform of modulated signals.

UNIT II RECEIVER CHARACTERISTICS 9
Noise sources and types – Noise figure and noise temperature – Noise in cascaded
systems – Single tuned receivers - Superheterodyne receivers

UNIT III BASEBAND TECHNIQUES 9
Review of low pass sampling – Quadrature sampling of Bandpass signals –
Quantisation – Uniform and non-uniform quantisation – Quantisation noise –
Companding laws of speech signals – PCM, DPCM, DM, ADPCM and ADM
Multiplexing – TDM (E and T lines), FDM

UNIT IV BANDPASS SIGNALING 9
Geometric representation of signals – Correlator and matched filter – ML detection –
generation and detection, PSD, BER of coherent BPSK, BFSK, QPSK – Principles of
QAM – Structure of non-coherent receivers – BFSK, DPSK.

UNIT V NOISE PERFORMANCE 9
Narrow band noise – PSD of in-phase and quadrature noise – Noise performance in
AM systems – Noise performance in FM systems – Pre-emphasis and de-emphasis
– Capture effect, threshold effect.

TOTAL: 45 PERIODS
TEXT BOOKS
1. J.G.Proakis, M.Salehi, “Fundamentals of Communication Systems” – Pearson
Education 2006

REFERENCES
1. B.Sklar, “Digital Communications Fundamentals and Applications” 2/e Pearson
Education 2007
2. S.Haykin, “Communication Systems” 3/e, John Wiley 2007
3. B.P.Lathi, “Modern Digital and Analog Communication Systems”, 3/e, Oxford
University Press,2007
4. D.Roody, J.Coolen, “Electronic Communications”, 4/e PHI 2006
5. H P Hsu, Schaum Outline Series - “Analog and Digital Communications” TMH
2006


EC 9254 CONTROL SYSTEMS L T P C
3 1 0 4

UNIT I CONTROL SYSTEM MODELING 9
Basic Elements of Control System – Open loop and Closed loop systems -
Differential equation - Transfer function, Modeling of Electric systems, Translational
and rotational mechanical systems - Block diagram reduction Techniques - Signal
flow graph

UNIT II TIME RESPONSE ANALYSIS 9
Time response analysis - First Order Systems - Impulse and Step Response analysis
of second order systems - Steady state errors – P, PI, PD and PID Compensation,
Analysis using MATLAB

UNIT III FREQUENCY RESPONSE ANALYSIS 9
Frequency Response - Bode Plot, Polar Plot, Nyquist Plot - Frequency Domain
specifications from the plots - Constant M and N Circles - Nichol’s Chart - Use of
Nichol’s Chart in Control System Analysis. Series, Parallel, series-parallel
Compensators - Lead, Lag, and Lead Lag Compensators, Analysis using MATLAB.


UNIT IV STABILITY ANALYSIS 9
Stability, Routh-Hurwitz Criterion, Root Locus Technique, Construction of Root
Locus, Stability, Dominant Poles, Application of Root Locus Diagram - Nyquist
Stability Criterion - Relative Stability, Analysis using MATLAB

UNIT V STATE VARIABLE ANALYSIS 9
State space representation of Continuous Time systems – State equations – Transfer
function from State Variable Representation – Solutions of the state equations -
Concepts of Controllability and Observability – State space representation for
Discrete time systems. Sampled Data control systems – Sampling Theorem –
Sampler & Hold – Open loop & Closed loop sampled data systems.

L:45,T:15 TOTAL: 60 PERIODS

TEXT BOOKS
1. J.Nagrath and M.Gopal,” Control System Engineering”, New Age International
Publishers, 5th Edition, 2007.

REFERENCES
1. Benjamin.C.Kuo, “Automatic control systems”, Prentice Hall of India, 7th Edition,1995.
2. M.Gopal, “Control System – Principles and Design”, Tata McGraw Hill, 2nd Edition, 2002.
3. Schaum’s Outline Series,’Feedback and Control Systems’ Tata McGraw-Hill,
2007.
4. John J.D’azzo & Constantine H.Houpis, ’Linear control system analysis and
design’, Tata McGrow-Hill, Inc., 1995.
5. Richard C. Dorf & Robert H. Bishop, “ Modern Control Systems”, Addidon –
Wesley, 1999.

EC 9255 COMPUTER ARCHITECTURE AND ORGANIZATION L T P C
3 0 0 3

UNIT I INTRODUCTION 9
Computing and Computers, Evolution of Computers, VLSI Era, System Design-
Register Level, Processor Level, CPU Organization, Data Representation, Fixed –
Point Numbers, Floating Point Numbers, Instruction Formats, Instruction Types.
Addressing modes.

UNIT II DATA PATH DESIGN 9
Fixed Point Arithmetic, Addition, Subtraction, Multiplication and Division,
Combinational and Sequential ALUs, Carry look ahead adder, Robertson algorithm,
booth’s algorithm, non-restoring division algorithm, Floating Point Arithmetic,
Coprocessor, Pipeline Processing, Pipeline Design, Modified booth’s Algorithm

UNIT III CONTROL DESIGN 9
Hardwired Control, Microprogrammed Control, Multiplier Control Unit, CPU Control
Unit, Pipeline Control, Instruction Pipelines, Pipeline Performance, Superscalar
Processing, Nano Programming.

UNIT IV MEMORY ORGANIZATION 9
Random Access Memories, Serial - Access Memories, RAM Interfaces, Magnetic
Surface Recording, Optical Memories, multilevel memories, Cache & Virtual Memory,
Memory Allocation, Associative Memory.

UNIT V SYSTEM ORGANIZATION 9
Communication methods, Buses, Bus Control, Bus Interfacing, Bus arbitration, IO
and system control, IO interface circuits, Handshaking, DMA and interrupts,
vectored interrupts, PCI interrupts, pipeline interrupts, IOP organization, operation
systems, multiprocessors, fault tolerance, RISC and CISC processors, Superscalar
and vector processor.

TOTAL: 45 PERIODS
TEXT BOOKS
1. John P.Hayes, ‘Computer architecture and Organisation’, Tata McGraw-Hill Third
edition, 1998.
2. V.Carl Hamacher, Zvonko G. Varanesic and Safat G. Zaky, “ Computer
Organisation“, V edition, McGraw-Hill Inc, 1996.

REFERENCES
1. Morris Mano, “Computer System Architecture”, Prentice-Hall of India, 2000.
2. Paraami, “Computer Architecture”, BEH R002, Oxford Press.
3. P.Pal Chaudhuri, , “Computer organization and design”,  nd Ed., Prentice Hall of  India, 2007.
4. Miles J. Murdocca and Vincent P. Heuring, Principles of Computer Architecture,
Printice Hall, 2000
5. G.Kane & J.Heinrich, ‘ MIPS RISC Architecture ‘, Englewood cliffs, New Jersey,
Prentice Hall, 1992.



EC 9256 ELECTRONIC CIRCUITS – II LAB L T P C
0 0 3 2 ELECTRONIC CIRCUITS
1. Design and Analysis of feeback Amplifiers
2. Design of RC Oscillators
3. Design of LC Oscillators
4. Design and frequency response of Tuned Amplifier
5. Design of Astable Multivibrator
6. Design of Monostable Multivibrator
7. Design of Schmitt trigger, hysterisis
8. AC voltage control using thyristors
TOTAL: 45 PERIODS

EC 9257 DIGITAL SYSTEM LAB L T P C
0 0 3 2

1 Implementation of simple Boolean expression using universal gates
2 Priority encoder
3 2 to 4 MUX and implementation of combination logic
4 JK and RS flip flop implementation using logic gates
5 Synchronous up/down counter
6 BCD ripple counter with 7 segment display
7 Ring counters
8 Data transfer using shift registers
9 Half adder and Full adder
10 Binary 4 bit parallel adder
11. System Design using VeriLog

TOTAL: 45 PERIODS


GE 9371 COMMUNICATION SKILLS AND SOFT SKILLS L T P C
FIFTH / SIXTH SEMESTER 0 0 2 1


AIM
To enhance the overall capability of students and to equip them with the necessary
Communication Skills and Soft Skills that would help them excel in their profession.

OBJECTIVES

•  To equip students of engineering and technology with effective speaking and listening skills in English.
• To help them develop their soft skills and interpersonal skills, which will make the transition from college to workplace smoother and help them excel in their jobs.
• To enhance the performance of students at Placement Interviews, Group Discussions and other recruitment exercises.

A. Viewing and discussing audio-visual materials (6 periods)

UIT I Resume / Report Preparation / Letter Writing: (2)
Letter writing – Job application with Resume - Project report - Email etiquette.

UNIT II Presentation skills (1)
Elements of effective presentation – Structure of presentation - Presentation tools –
Body language.

UNIT III Soft Skills (1)
Time management – Stress management – Assertiveness – Negotiation
strategies.

UNIT IV Group Discussion (1)
Group discussion as part of selection process, Structure of group discussion –
Strategies in group discussion – Mock group discussions.

UNIT V Interview Skills (1)
Kinds of interviews – Interview techniques – Corporate culture – Mock interviews.
(Career Lab Software may be used for this section).

Note: Career Lab software may be used to learn the skills, to be applied in the
practice session.

B. Practice session (24 periods)

1. Resume / Report Preparation / Letter writing: (4)
Students prepare their own resume and report.

2. Presentation Skills: (8)
Students make presentations on given topics.

3. Group Discussion: (6)
Students participate in group discussions.

4. Interview Skills: (6)
Students participate in Mock Interviews
TOTAL: 30 PERIODS

REFERENCES
1. Anderson, P.V, Technical Communication, Thomson Wadsworth, Sixth
Edition, New Delhi, 2007.
2. Prakash P, Verbal and Non-Verbal Reasoning, Macmillan India Ltd., Second
Edition, New Delhi, 2004.
3. John Seely, The Oxford Guide to Writing and Speaking, Oxford University
Press, New Delhi 2004.
4. David Evans, Decisionmaker, Cambridge University Press, 1997.
5. Thorpe, E and Thorpe, S Objective English, Pearson Education,
Second Edition, New Delhi 2007.
6. Turton, N.D and Heaton, J.B, Dictionary of Common Errors, Addision Wesley
Longman Ltd., Indian reprint 1998.